A successful turnkey environmental project should address the load entering the treatment plant—not simply install more equipment.
Premia Envirotech begins in the processing area. Through detailed water and air audits, source-wise flow mapping, water balances and pollutant-load analysis, we identify opportunities to reduce fresh-water consumption, wastewater generation and parameters such as BOD, COD, TSS and TDS at the source, wherever technically feasible.
The treatment and recovery system is then designed for the actual residual load. From concept development and engineering to equipment supply, installation, commissioning, performance stabilisation, operator training and handover, we provide coordinated project execution through a single point of responsibility.
Our turnkey solutions serve textile, dyeing, printing, pulp and paper, wood-processing, iron and steel, metal-finishing, pharmaceutical, chemical, food-processing and other industries.
Every system is designed around the industry, production process, measured wastewater characteristics, load variations, available utilities, site conditions and required treated-water objective.
Physical, chemical, biological, membrane, evaporation and sludge-management processes are integrated according to the actual application, rather than selected from a standard equipment list.
Instrumentation, dosing controls, safety interlocks and PLC/SCADA-based automation can be incorporated to improve operational consistency, visibility and process control.
We identify technically viable opportunities for treated-water, permeate and condensate reuse while planning the safe handling of sludge, concentrate and other residual streams.
Premia Envirotech combines source reduction, practical engineering and coordinated project execution to create systems that are easier to operate and better aligned with your production requirements.
Reduce water use, wastewater volume and pollutant load within the process before finalising treatment-plant capacity.
Design plant capacity around verified flows, pollutant mass loads and operational variations instead of assumptions alone.
Coordinate process engineering, equipment supply, civil interfaces, piping, electrical systems, instrumentation, erection and commissioning through one project team.
Avoid unnecessary treatment stages and oversized equipment while improving opportunities for water recovery and reuse.
Develop execution and integration plans around site limitations and existing production operations wherever feasible.
Complete testing, commissioning, performance stabilisation, operating procedures and operator training before project handover.
Share your process and project information with our team. We will review the design basis before recommending the treatment technology and plant configuration.
Treatment systems for domestic sewage generated by industrial facilities, institutions, commercial premises and residential developments.
Integrated systems designed to maximise water recovery and minimise the liquid effluent leaving an industrial facility.
Customised treatment plants for industrial effluent containing organic matter, suspended solids, dissolved solids, colour, oil, metals or process-specific contaminants.
Consistent process performance begins with water of the required quality. Premia Envirotech designs water-treatment plants according to the raw-water source, variation in feed quality and the final application within the facility.
Depending on the requirement, a system may include coagulation and clarification, pressure-sand filtration, activated-carbon filtration, softening, ultrafiltration, reverse osmosis, demineralisation, disinfection, chemical dosing, treated-water storage and automation.
The design considers recovery, reject management, chemical consumption, energy use, maintenance access and integration with existing utility systems.
Multiple-effect evaporators are used to concentrate RO reject and other high-TDS industrial streams as part of a properly engineered recovery or ZLD system.
MEE selection requires more than an evaporation-capacity calculation. Feed chemistry, scaling tendency, foaming, boiling-point elevation, material compatibility, steam availability, condensate quality and cleaning requirements must all be evaluated.
Our scope may include feed conditioning, preheating, evaporation effects, vapour separation, condensers, vacuum systems, circulation pumps, instrumentation, cleaning arrangements, condensate polishing and integration with ATFD or other solids-management systems.
An ATFD receives concentrated slurry, commonly from an MEE, and further removes moisture to produce a dry or low-moisture solid.
The system is selected according to feed concentration, salt characteristics, viscosity, scaling behaviour, required output and downstream solids-handling arrangements. Project scope can include feed conditioning, heating, vapour recovery, solids collection, instrumentation, safety systems and integration with the upstream evaporator.
The reuse, recovery or disposal route for the resulting solids must be determined through proper characterisation and applicable regulatory requirements.
Premia Envirotech provides treatment solutions for suitable, segregated biodegradable waste generated by industrial kitchens, canteens, food-processing facilities, institutions and commercial premises.
The system is selected after reviewing waste type, daily quantity, moisture content, segregation practices, available space and the intended use or disposal route for the processed output.
The scope may include waste assessment, segregation planning, shredding, biological processing, odour and leachate control, curing and output handling.
Organic-waste systems are intended for compatible biodegradable material and do not replace authorised treatment or disposal routes for hazardous, biomedical or incompatible industrial waste.
Effective air-pollution control begins with identifying where emissions are generated and how they can be captured before dispersing into the workplace or atmosphere.
Premia Envirotech conducts air and emission audits covering boilers, furnaces, dryers, process vents, material handling, dust-generating operations and other relevant sources. The assessment considers emission type, particulate loading, temperature, moisture, gas composition, operating pattern and applicable requirements.
Depending on the application, the solution may include source hoods, ducting, cyclones, bag filters, wet or dry scrubbers, mist eliminators, activated-carbon systems, induced-draft fans, stacks, instrumentation and monitoring provisions.
The final system is selected using process information and test data rather than adopting a standard pollution-control device for every application.
Audit-Led Engineering: Our design process begins with measured data, source mapping and a clearly documented design basis.
End-to-End Coordination: We coordinate engineering, supply, installation, testing and commissioning through one responsible project team.
Transparent Performance Basis: Plant capacity and performance commitments are defined against an agreed influent envelope, operating conditions, utilities and treated-water objective.
Commissioning & Capability Transfer: We support performance stabilisation, operating procedures, documentation and operator training for a smoother handover.
Our team at Premia Chemicals Pvt Ltd is ready to support you with any queries.
16140-75442The scope can include site assessment, water or air audit, sampling, process design, detailed engineering, equipment supply, civil and utility coordination, piping, electrical systems, instrumentation, automation, erection, testing, commissioning, performance stabilisation, documentation, training and handover. The final scope is clearly defined in the project proposal.
Technology is selected after evaluating the production process, source-wise flow, pollutant mass load, laboratory results, load variations, reuse or discharge objective, site constraints, utilities, operating capability and lifecycle cost.
Every litre of water and every kilogram of pollutant entering an ETP must be treated. Reducing water consumption and contaminant load within the process can lower hydraulic and pollution loads, simplify treatment and improve the operating economics of the final plant.
Yes. We can audit an existing plant, identify hydraulic, process, mechanical, instrumentation and operating limitations, and recommend debottlenecking, retrofitting or phased expansion. Recommendations are made after reviewing plant data and site conditions.
No. ZLD suitability depends on applicable requirements, water availability, effluent characteristics, reuse objectives, site conditions and technical and economic feasibility. We evaluate the complete water balance before recommending ZLD.
Performance commitments are based on an agreed design flow, influent-quality envelope, utility availability, operating conditions and defined treated-water objective. These parameters and responsibilities are documented during the proposal and contract stage.