Premia Envirotech provides industrial water, wastewater, air-audit and resource-recovery solutions based on a simple principle: the performance of an ETP is determined largely by what happens before the effluent reaches it.
We work inside the production process to identify where water is consumed, where pollution is generated and what can be reduced, segregated, reused or recovered at source. The residual effluent is then treated through an appropriately engineered ETP, recycling or Zero Liquid Discharge system.
Premia Envirotech is a subsidiary of Premia Chemicals Pvt. Ltd.
This relationship brings together the process-chemistry capabilities of Premia Chemicals and the environmental-engineering capabilities of Premia Envirotech. It enables us to evaluate chemical usage, production practices, utility consumption and wastewater treatment as one connected industrial system.
Every litre entering an ETP carries contaminants introduced upstream. Excessive washing increases hydraulic load. Chemical overdosing can increase COD and TDS. Product losses contribute to BOD, COD and TSS. Mixing different wastewater streams can also eliminate opportunities for reuse and recovery.
Premia Envirotech maps these sources, quantifies their impact and develops a coordinated improvement programme covering the process area, utilities, wastewater treatment and water recovery.
To transform industrial water and environmental management from an end-of-pipe treatment obligation into a source-first strategy for resource efficiency, operational reliability and sustainable growth.
• Source Before Treatment: We begin in the production area to understand how water is used and how BOD, COD, TSS, TDS, colour, oil, salts and other contaminants are generated.
• Chemistry and Engineering Together: Our relationship with Premia Chemicals Pvt. Ltd. gives us a deeper understanding of process chemistry, chemical dosing, material losses and their influence on wastewater quality.
• Data Before Design: Treatment systems are developed from water balances, source-wise flow measurement, laboratory analysis, operating schedules, recovery objectives, utilities and site constraints.
• Lifecycle Accountability: Our involvement can extend from audit and engineering through equipment supply, installation, commissioning, performance stabilization, plant upgradation and operation and maintenance.
• Water, Air and Pollution-Load Audits: Plant-wide water balances, compressed-air assessments, source-wise wastewater mapping, pollution-load measurement and identification of avoidable losses.
• Source Reduction and Process Optimization: Improvement of washing, rinsing, chemical dosing, material handling, bath reuse, stream segregation and internal water-recycling practices.
• Treatment, Recycling and ZLD Systems: Engineering and execution of ETP, STP, CETP, DAF, biological treatment, MBR, UF, RO, MEE, ATFD, sludge-management and resource-recovery systems.
• Plant Upgradation and Lifecycle Support: Technical audits, troubleshooting, capacity enhancement, automation, performance stabilization, laboratory monitoring and operation and maintenance services.
Our objective is not simply to reduce water consumption and create a smaller but more concentrated wastewater stream. We work to reduce both the hydraulic load and total pollutant mass through process optimization, chemical control, material-loss reduction, stream segregation and internal reuse.
The resulting treatment system can then be designed or upgraded around the actual residual load—making it more stable, efficient and commercially viable.
Understand where water, air, chemicals and pollution enter the process before deciding on treatment.
Treat the unavoidable residual load, recover usable water and continuously improve plant performance.
Our team is available to discuss your industrial water, air, wastewater-treatment or resource-recovery requirement.
0161 407 5442Premia Envirotech is a subsidiary of Premia Chemicals Pvt. Ltd. It combines the parent company’s process-chemistry and industrial application knowledge with environmental engineering, water management, wastewater treatment and resource-recovery capabilities..
We do not begin only at the ETP inlet. We first study the production process to identify where water is consumed and where pollutants are generated. We then reduce avoidable water and pollution loads before engineering the treatment and recovery system for the remaining effluent.
The scope can include raw-water intake, process-wise consumption, water balance, wastewater generation, leakages, washing and rinsing practices, reuse opportunities, compressed-air generation, distribution pressure, leakage, inappropriate usage and relevant air-handling or emission-control systems.
It can if water reduction is implemented without process optimization. Therefore, our objective is not simply to reduce wastewater volume. We target both hydraulic load and pollutant mass through chemical optimization, material-loss reduction, stream segregation and internal reuse.
We serve textile, dyeing, printing, paper, pulp, plywood, wood-processing, iron, steel, metal-finishing, pharmaceutical, chemical, food, beverage, automotive and other process industries.
Yes. We can audit an existing ETP, STP, RO, MBR or ZLD system to identify hydraulic, biological, chemical, membrane, mechanical and operational limitations. Recommendations may include source reduction, process modification, equipment upgrades, automation, capacity enhancement and operating support.
Share your manufacturing process, water consumption, wastewater analysis, existing treatment facilities and recovery objectives with our engineering team.