Premia Operation & Maintenance Services

Effective plant operation requires more than deploying manpower. It requires process control, laboratory discipline, preventive maintenance, utility management and clear accountability for every operating parameter.
Premia Envirotech provides structured Operation and Maintenance services for industrial ETPs, STPs, WTPs, UF and RO plants, water-recycling systems, ZLD facilities, MEE, ATFD and associated sludge-management systems.
Before taking over a plant, we conduct a baseline technical assessment covering actual flow and influent characteristics, installed treatment capacity, equipment condition, operating practices, chemical consumption, laboratory controls, automation, maintenance requirements and current performance limitations.
Our team then establishes plant-specific SOPs, operating parameters, monitoring schedules, performance indicators and escalation protocols. When an abnormal load reaches the ETP, we also trace it back to the process source so that recurring BOD, COD, TSS, TDS, colour, oil or pH shocks can be reduced within the production area.

Key Features of Our Operation & Maintenance Services

Plant-Specific O&M Programme

Operating schedules, manpower deployment, SOPs and monitoring systems are tailored to the treatment process, plant capacity, operating hours and required outlet quality.

Process & Laboratory Control

Critical parameters are monitored through planned sampling, laboratory testing, shift logbooks, trend analysis and defined corrective-action procedures.

Preventive Maintenance

Equipment inspection, lubrication, calibration, cleaning, servicing and critical-spares planning help reduce unplanned breakdowns and extend asset life.

Performance Reporting

Structured reports provide management with visibility into plant performance, chemical consumption, energy use, downtime, deviations and corrective actions.

Benefits for Your Industry

Benefits for Your Industry

A professionally managed treatment plant provides greater operational stability, better cost visibility and stronger control over environmental performance.

REQUEST AN O&M ASSESSMENT
Consistent Treatment Performance

Consistent Treatment Performance

Maintain critical operating parameters within their defined ranges and respond promptly to variations in flow and pollutant load.

Lower Operating Cost

Lower Operating Cost

Optimise chemical dosing, aeration, pumping, membrane cleaning, sludge handling and other major operating costs.

Reduced Plant Downtime

Reduced Plant Downtime

Use preventive maintenance, equipment inspections and critical-spares planning to address developing problems before they become major failures.

Improved Asset Life

Improved Asset Life

Operate pumps, blowers, membranes, dosing systems, filters and thermal equipment within appropriate operating limits.

Better Management Visibility

Better Management Visibility

Provide shift-wise, daily and monthly records covering plant performance, resource consumption, maintenance and abnormal events.

Clear Operational Accountability

Clear Operational Accountability

Establish defined responsibilities, escalation procedures, performance indicators and corrective-action tracking for the O&M team.

Improved Asset Life

Move From Reactive Operation to Controlled Performance

Allow our team to assess your existing treatment plant, identify performance gaps and develop a structured O&M programme

ETP & STP Operation

Structured operation of industrial effluent-treatment and domestic sewage-treatment systems.

  • Shift-wise plant operation and operating logbooks
  • Control of equalisation, pH, DAF, biological and tertiary processes
  • Monitoring of aeration, biomass health, settling and sludge generation
  • Sludge dewatering, housekeeping and abnormal-load management

WTP, UF, RO & Water-Recycling Operation

Performance-focused management of raw-water treatment, membrane systems and treated-water recovery plants.

  • Pretreatment, filtration and chemical-dosing control
  • Pressure, flow, recovery, conductivity and differential-pressure monitoring
  • Membrane cleaning, preservation and replacement planning
  • Permeate, reject and internal-reuse water-balance management

ZLD, MEE & ATFD Operation

Controlled operation of high-TDS treatment, evaporation and solids-management systems.

  • Feed segregation, concentration and chemistry monitoring
  • Scaling, fouling, vacuum, steam and cleaning-cycle management
  • Condensate quality and recovered-water monitoring
  • Salt, concentrate, sludge and residual-waste handling records
Sustainabilty
greenery

Process Operation & Laboratory Control

Stable plant performance begins with disciplined process operation. Premia Envirotech establishes plant-specific operating procedures for start-up, shutdown, normal operation, load variation, emergency conditions and process recovery.
Operating parameters may include flow, pH, dissolved oxygen, MLSS, sludge-settling characteristics, turbidity, conductivity, pressure, membrane recovery, differential pressure, chemical dosing and other process-specific indicators.

  • Shift-wise plant operation and supervision
  • Daily operating logbooks and checklists
  • Sampling and laboratory-testing schedules
  • Chemical preparation and dosing control
  • Biological-process monitoring
  • Membrane-performance tracking
  • Sludge generation and dewatering records
  • Abnormal-load identification and escalation
  • Treated-water reuse coordination
  • Housekeeping and safety checks

Where statutory or specialised testing is required, samples can be coordinated with an appropriately accredited laboratory.

Preventive Maintenance & Asset Reliability

Treatment plants frequently lose performance because maintenance begins only after equipment failure. Our preventive-maintenance programme is designed to identify deterioration before it causes process disruption.
An equipment register and maintenance calendar are prepared for pumps, blowers, agitators, dosing systems, DAF units, filters, membranes, presses, evaporators, dryers, instruments, panels and other installed assets.

  • Daily, weekly and monthly equipment inspections
  • Lubrication and alignment schedules
  • Pump, blower and motor-condition checks
  • Instrument and sensor calibration
  • Filter backwashing and media inspection
  • Membrane flushing, cleaning and preservation
  • MEE and ATFD cleaning schedules
  • Electrical-panel and safety-interlock checks
  • Critical-spares identification
  • Breakdown analysis and corrective-action tracking

Major repairs, replacements and capital modifications are reported separately with technical justification and management approval.

Performance Optimisation, Reporting & Compliance Support

Our objective is not merely to keep equipment running. We work to improve the technical and commercial performance of the complete treatment system.
Plant data is converted into measurable operating indicators such as chemical consumption per kilolitre, power consumption per kilolitre, membrane recovery, sludge generation, equipment availability and treated-water recovery.

  • Actual flow versus design capacity
  • Influent and treated-water quality
  • Chemical, power and water consumption
  • Equipment downtime and maintenance status
  • Membrane performance and cleaning history
  • Sludge and residual-waste generation
  • Process deviations and root-cause analysis
  • Corrective and preventive actions
  • Source-wise pollution-load observations
  • Opportunities for water reuse and cost reduction

Where performance problems originate in production, our team works with plant management to identify excessive washing, chemical overdosing, product loss, stream mixing, high-load dumping and other avoidable causes.

Our Service Highlights

Our Service Highlights

  • Technical O&M Assessment: Baseline evaluation of plant capacity, equipment condition, process limitations and existing operating practices before takeover.
  • Qualified Manpower With Technical Supervision: Plant operators work under defined SOPs, reporting protocols and periodic engineering review.
  • Measurable Performance Indicators: Plant operation is monitored through agreed hydraulic, quality, consumption, recovery, maintenance and availability parameters.
  • Continuous Improvement: Operating data is used to identify cost-reduction, source-reduction, water-recovery and plant-upgradation opportunities.

FAQ

We believe in complete transparency and customer satisfaction

Still have questions?

Our team at Premia Chemicals Pvt Ltd is ready to support you with any queries.

16140-75442

Our O&M scope can cover ETPs, STPs, WTPs, softening and demineralisation plants, UF and RO systems, water-recycling plants, ZLD systems, MEE, ATFD, sludge-dewatering equipment and associated environmental-treatment systems.

We conduct a baseline assessment of the installed system, actual flow, influent characteristics, treated-water requirements, equipment condition, pending maintenance, chemical consumption, manpower, laboratory facilities and present performance. This assessment is used to define the O&M scope, improvement plan and responsibilities.

Yes. However, the existing plant must first be audited to separate operational problems from design, capacity or equipment limitations. We then prepare a stabilisation plan covering immediate corrections, maintenance, process modifications and any required capital upgrades.

Performance commitments are established against an agreed flow and influent-quality envelope, installed plant capability, utility availability, operating hours and treated-water objective. Any existing design or equipment limitations are documented before finalising the contract.

They can be included or managed separately, depending on the agreed commercial model. All consumables and replacement requirements should be reported transparently, with consumption monitored against defined operating indicators.

Yes. Manpower can be deployed for general shift, multiple shifts or continuous operation depending on plant capacity, operating schedule, automation level and site requirements. Final deployment is determined after the site assessment.

;